Skip to content

Handmade in Turkiye | Worldwide Shipping

Tufting Halımda İplikler Dökülüyor: Nasıl Düzeltilir?

My Tufted Rug Is Shedding: Causes & How to Fix It

Because tufted rugs are handmade, custom creations, you might sometimes encounter issues like yarn shedding. These problems usually stem from improper techniques, insufficient gluing, or material quality.

But don't panic! In this guide prepared with GG Tufting expertise, you will find professional solutions to prevent shedding and restore your rug to its original form.

🔍 1. Why Is My Rug Shedding?

Before fixing the problem, we need to find the source. Here are the most common culprits:

Insufficient Glue

The latex adhesive on the back may not have been applied thickly enough to penetrate and grip the yarn roots.

Loose Cloth

If the primary tufting cloth isn't stretched drum-tight during the process, the yarn won't stay secure in the mesh.

Low-Quality Yarn

Very thin or brittle yarns can easily break and shed with friction over time.

Cut Pile Errors

In Cut Pile rugs, if the scissors are dull, the yarn isn't cut cleanly and may pull out when tugged.

🛠️ 2. Step-by-Step Repair Guide

Follow these steps to stop the shedding and save your rug:

1
Reinforce the Backing

Apply a fresh layer of Liquid Latex or carpet glue to the back of the rug. Use a spatula to press firmly, ensuring the glue penetrates the yarn roots. Let it dry for 24 hours.

2
Spot Repair (Patching)

If there are bald spots, manually fill in the missing areas (using a needle and thread or a gun) with the same color yarn. Then, apply glue from the back again.

3
Surface Trimming

Once the glue is dry, trim any long or loose yarns on the front surface with sharp scissors. Don't pull them, cut them!

🛡️ 3. Prevention Shield: Stop Future Shedding

Golden Rules for a Durable Rug

  • Secondary Backing: Always apply a second layer of fabric (Action Back or Felt) over the glue. This locks the yarn in from behind.
  • Edge Binding: Prevent edges from unraveling by sewing or gluing binding tape (twill tape) around the perimeter.
  • Proper Vacuuming: When cleaning, use the suction attachment only. Avoid the rotating brush (beater bar), as it can pull out the fibers.
💡 Professional Tip:
Adding a Non-Slip Backing isn't just for safety; it reduces friction against the floor, significantly extending the life of your yarn.
⚠️ Warning: If the shedding covers a large area and glue doesn't solve it, the cleanest solution might be to remove the yarn in that section and re-tuft it completely.

Shedding in tufted rugs can be annoying, but it's not a disaster. With the right materials and maintenance, your rugs can look as good as new for years.

Previous Post Next Post

Leave a comment

Please note, comments need to be approved before they are published.